3G SDI to AV scaler converter

Model Number: YLSC01-#2252 Key Specifications/Special Features: Introduction:SDI to AV scaler converter allows SD-SDI, HD-SDI and 3G-SDI signals to be shown on CRT or HDTV while ensuring high bit rates of 2.970Gbit/s to give you fast signal transmission without any lossFor professionals this means that it is now easier to distribute and extend your 3G SDI signal while giving you the ability to display your work on TV thanks to the built in this converterLoop-through 3G-SDI design, users are able to enjoy both SDI and AV at the same timeFeatures:Operation at 2.970Gbit/s, 2.970/1.001Gbit/s, 1.485Gbit/s, 1.485/1.001Gbit/s and 270Mbits/s

Equalized and re-clocked loop output

Auto video mode detection (3G/HD/SD)

Conversion from SMPTE 425M level B to level A 1080p 50/59.94/60 4:2:2 10-bit

Connect with other units to extend your signal over long distances

Simultaneous display with SDI /AV signals

Alternative audio output to analog 2CH

Supports signal transmission distances of up to 300M for SD signals, 200M for HD signals and 100M for 3G signals

Note: cable tested with Belden 1694A

Operating distances may vary if used with another type of cable

Package:

• 3G SDI to AV scaler converter
• 5V DC power supply adapter
• Operation manual

Specifications:

• SMPTE standard: 425M level A and B, 424M, 292M, 259M-C
• SDI transmission rates: 2.970Gbit/s and 2.970/1.001 Gbit/s
• SDI in/out resolution: SD:480i@60, 576i@50 HD, 720p@50/60, 1080i@50/60
• 3G:1080p@24/25/29.97/30/50/59.94/60
• CVBS output resolution: PAL/NTSC-M
• Input port: 1 x BNC (SD/HD/3G-SDI)
• Output port: 1 x BNC (SD/HD/3G-SDI), 3 x RCA (CVBS, L/R)
• Power supply: DC5V -12V
• ESD protection human body model: ±8kV (air-gap discharge), ±4kV (contact discharge)
• Dimension: 95 x 60 x 25 mm
• Weight: 260g
• Operating temperatures: 0 - 40°C/32°F
• Storage temperatures: -20 - 60°C/-4 - 140°F
• Relative humidity range: 20-90% RH (non-condensing)
• Power consumption (maximum): 5W